perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 5 (click to view)
1 SUPPLY POWER TO CHARGER power Plug the AC Adapter/Charger's
cord in to an AC outlet. The power indicator comes on.
4 DETACH BATTERY/BATTERIES in the Slide the battery or batteries
direction of the arrow and lift off. �Remember to unplug the AC Adapter/ Charger's power cord from an AC outlet.
2 ATTACH BATTERY/BATTERIES
Make sure the + � marks are facing down and aligned with the corresponding marks on the AC Power Adapter/Charger. �The Charge Indicator (1 or 2) begins blinking to indicate charging has started.
NOTE:
Perform charging where the temperature is between 10° and 30°C. (20°�25°C is the ideal temperature range for charging.) If the environment is too cold, charging may be incomplete.
3 CONFIRM STATUS indicator stops blinking When the charger
but stays lit, charging is finished. �If two batteries are attached to the charger, they will be charged in the order that they were attached.
* When charged at temperatures between 20° and 25°C. �When charging Battery Packs after a long storage period, charging time will be longer than the time indicated above.
EN-5
