There are currently no product reviews.
I received the Manual in a timely manner and it was exactly what I needed.
This is a perfect copy of the Service Manual, The quality is great. I am very
happy. Thank you
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
The manual was exact the thing that was promised. My old car stereo is working again thanks to the information supplied.
I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
You can fully trust on this one!
All the schematics are very crear an in one piece per page
ADJUSTMENT OF WHITE BALANCE
Item WHITE BALANCE (Low Light) Adjustment Measuring instruments Signal generator Test point Adjustment part BRIGHT R. CUTOFF G. CUTOFF B. CUTOFF SCREEN VR [In HVT] [LOW LIGHT] MODE
BRIGHT R CUTOFF BRIGHT *** *** *** G CUTOFF B CUTOFF
Description 1. Receive a black-and-white signal.(Color off) 1. Select the LOW LIGHT MODE from the SERVICE MENU. 3. Set the initial setting value of BRIGHT with the LEFT / RIGHT key of the remote control unit. 4. Set the initial setting value of R CUTOFF, G CUTOFF and B CUTOFF with the unit. to key of the remote control key of the
5. Display a single horizontal line by pressing the remote control unit. 6. Turn the screen VR all the way to the left.
7. Turn the screen VR gradually to the right from the left until either one of the red, blue or green colors appears faintly. 8. Adjust the two colors which did not appear until the single horizontal line that is displayed becomes white using the to keys of the remote control unit. 9. Turn the screen VR to where the single horizontal line glows faintly. 10. Press the key to return to the regular screen.
*** EXIT BY
REMOTE CONTROL UNIT
H.LINE ON H.LINE OFF EXIT
EXIT key is the cancel key for the WHITE
R CUTOFF G CUTOFF
WHITE BALANCE (High Light) Adjustment
G. DRIVE B. DRIVE
1. Receive a black-and-white signal. (Color off) 2. Select the HIGH LIGHT MODE in the SERVICE MENU. 3. Set the initial setting value of G DRIVE and B DRIVE with the , , and keys of the remote control unit. 4. Adjust the screen until it becomes white using the and keys of the remote control unit. , ,
[HIGH LIGHT] MODE
(EXIT) key is the cancel key for the WHITE Remote Control Unit
BALANCE. key : H.LINE ON key : H.LINE OFF key : EXIT key : G DRIVE key : B DRIVE key : G DRIVE key : B DRIVE
HIGH LIGHT ***
*** EXIT BY