There are currently no product reviews.
This scanned manual is well done in that most all the pages except for one is straight and clear- the way I would do them. One page was upside down but that happens. For the money that is charged on this site you get a pretty good deal. Now with complex repairs, I still prefer to us paper manuals which I have to buy at stereomanuals but the one I got here was much less than the $45 he was charging but this is a larger than normal manual for three different units. I am a picky manual user because I have used original manuals from Sony and Teac.
Very useful service manual, was exactly what i needed.Good quality,reasonable price.Thank you.
Acurate informations inside the SM and I could repair my old Sansui SC-3330 without any problems. Thanks.
I used it to repair a NAD 7030, but unfortunately, the 7045 is different !
But documentation was useful.
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
ADJUSTMENT OF WHITE BALANCE
Item WHITE BALANCE (Low Light) Adjustment Measuring instruments Signal generator Test point Adjustment part BRIGHT R. CUTOFF G. CUTOFF B. CUTOFF SCREEN VR [In HVT] [LOW LIGHT] MODE
BRIGHT R CUTOFF BRIGHT *** *** *** G CUTOFF B CUTOFF
Description 1. Receive a black-and-white signal.(Color off) 1. Select the LOW LIGHT MODE from the SERVICE MENU. 3. Set the initial setting value of BRIGHT with the LEFT / RIGHT key of the remote control unit. 4. Set the initial setting value of R CUTOFF, G CUTOFF and B CUTOFF with the unit. to key of the remote control key of the
5. Display a single horizontal line by pressing the remote control unit. 6. Turn the screen VR all the way to the left.
7. Turn the screen VR gradually to the right from the left until either one of the red, blue or green colors appears faintly. 8. Adjust the two colors which did not appear until the single horizontal line that is displayed becomes white using the to keys of the remote control unit. 9. Turn the screen VR to where the single horizontal line glows faintly. 10. Press the key to return to the regular screen.
*** EXIT BY
REMOTE CONTROL UNIT
H.LINE ON H.LINE OFF EXIT
EXIT key is the cancel key for the WHITE
R CUTOFF G CUTOFF
WHITE BALANCE (High Light) Adjustment
G. DRIVE B. DRIVE
1. Receive a black-and-white signal. (Color off) 2. Select the HIGH LIGHT MODE in the SERVICE MENU. 3. Set the initial setting value of G DRIVE and B DRIVE with the , , and keys of the remote control unit. 4. Adjust the screen until it becomes white using the and keys of the remote control unit. , ,
[HIGH LIGHT] MODE
(EXIT) key is the cancel key for the WHITE Remote Control Unit
BALANCE. key : H.LINE ON key : H.LINE OFF key : EXIT key : G DRIVE key : B DRIVE key : G DRIVE key : B DRIVE
HIGH LIGHT ***
*** EXIT BY