|
Who's Online
There currently are 5987 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual was exactly what i needed and could not find elsewhere. Price is not too high. Great !
;
ecelent I was reciver the service manual soon I fell so happy very complete 100% positive all by this store tanks atte Luis salazar
;
A great copy of the manual, and the only one I could find anywhere on the net! The circuit diagrams are easily readable, all component values marked and easy to see. A highly appreciated download!
;
Great Manual. This manual is available no where else. It was exactly what I was looking for.
;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
AV-21F1P
DEFLECTION CIRCUIT ADJUSTMENT
The setting (adjustment) using the remote control unit is made on the basis of the initial setting values shown on page 14. The setting values which adjust the screen to the optimum condition can be different from the initial setting values. q Do not change the initial setting values of the setting (adjustment) items not listed herein.
Item
Measuring instrument q Signal
Test point
Adjustment part
Description
Adjustment
56. V
POS. 60
(60Hz) 1. Receive a cross-hatch signal. (NTSC or PAL-M) 2. Select the sub menu screen PICTURE from the SERVICE MENU. 3. Select 56. V POS. 60 with the MENU 1/4 key, and confirm that the setting value is 0. NOTE: The value of 56. V POS. 60 should be fixed to 0. 4. Confirm the initial setting value of 57. V SIZE60, 58. V S CR60, and 59. V. LIN. 60. 5. Adjust 57. V SIZE60 and make the vertical screen size 92% of the picture size, with the MENU 2/3 key. 6. Adjust 59. V. LIN. 60 and 58. V S CR60 to get the best vertical linearity, with the MENU 2/3 key.
of generator V. HEIGHT V. POSITION q Remote V. LIN. V. S CR control unit
57. V SIZE60 58. V S CR60 59. V. LIN. 60
50. V POS. 50 51. V SIZE50 52. V S CR50 53. V. LIN. 50
Screen size
(50Hz) 1. Receive a cross-hatch signal. (PAL-N) 2. In the sub menu screen PICTURE, select 50. V POS. 50, 51. V SIZE50, 52. V S CR50, and 53. V. LIN. 50 with the MENU 1/4 key, and confirm their initial setting values. 3. Adjust 51. V SIZE 50 and make the vertical screen size 92% of the picture size, with the MENU 2/3 key. 4. Adjust 53. V. LIN. 50 and 52.V S CR50 to get the best vertical
Screen size 92%
Picture size 100%
linearity, with the MENU 2/3 key. 5. Adjust 50. V POS. 50 so that the vertical center line comes close to the CRT vertical center as much as possible, with the MENU 2/3 key. q Readjust V SIZE, V. LIN, V S CR if necessary.
Picture size 100%
Adjustment q Signal of generator H. POSITION q Remote control unit
54. H POS.60
(60Hz) 1. Receive a cross-hatch signal. (NTSC or PAL-M) 2. Select the sub menu screen PICTURE from the SERVICE MENU. 3. Select 54. H POS.60 with the MENU 1/4 key. 4. Confirm the initial setting value of 54. H POS.60. 5. Adjust 54. H POS.60 so that the screen will be horizontally centered, with the MENU 2/3 key.
48. H POS.50
(50Hz) 1. Receive a cross-hatch signal. (PAL-N) 2. In the sub menu screen PICTURE, select 48. H POS.50 with the MENU 1/4 key. 3. Confirm the initial setting value of 48. H POS.50. 4. Adjust 48. H POS.50 so that the screen will be horizontally centered, with the MENU 2/3 key.
No. 56033
17
|
|
|
> |
|