perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 21 (click to view)
EXT SETTING
I DUBBING
You can choose a signal source to be output from an EXT-2 terminal. You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.
1 Press the 5 buttons to choose the arrow
from the menu.
EXT SETTING EXT-1 EXT-3 EXT-4 TV BACK
TV OK
DUBBING EXT-2
D0022-EN
2 Press the 6 buttons to choose an EXT
terminal or TV.
The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT2 terminal.
TV:
The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.
3 Press the a button to complete the setting.
The menu disappears. Note: � During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. � When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. � The RGB signals from the TV games cannot be output.Teletext programmes cannot be output.