Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 30 (click to view)
Using the TV�s menu 2 Press the green button to set the DIGITAL-IN Pressing the green button repeatedly until the mark which is the same as the type of cable connected to the DIGITAL AUDIO IN terminal is selected. : Select this mark when connected with coaxial cable. : Select this mark when connected with optical cable. To cancel the DIGITAL-IN setting: Press the green button to turn off the mark of DIGITAL-IN. 3 Press the a button to complete the setting The menu disappears. � DIGITAL-IN cannot be set for the TV and EXT-4 terminal. � This TV does not work with digital audio signals other than Dolby Digital audio. If no sound is emitted from the speakers, cancel the DIGITAL-IN setting and change to normal analog sounds. 3 Press the 6 buttons to choose a name. Then press the a button The ID LIST disappears and the name is assigned to the EXT terminal. � You cannot assign an EXT terminal name not found in the name list (ID LIST).
ENGLISH
To erase a name assigned to the EXT terminal: Choose a blank space. 4 Press the a button to complete the setting
DUBBING
You can choose a signal source to be output from an EXT-2 terminal. You can choose any one of the output signal of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal. 1 Press the 5 buttons to choose the arrow from the menu
EXT SETTING EXT-1
ID LIST
You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name. 1 Choose an EXT terminal 2 Press the blue button to display the name list (ID LIST)
EXT SETTING EXT-1 ID LIST
EXT-3
DUBBING EXT-2
EXT-4
TV
BACK
TV OK
D0022-EN
EXT-3
DUBBING EXT-2
VHS S-VHS DVC SAT STB GAME LD DVD 8mm Hi-8
EXT-4
TV
BACK TV
OK
2 Press the 6 buttons to choose an EXT terminal or TV. Then press the a button The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal. EXT-1/EXT-3/EXT-4: The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal. TV: The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.
