Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
Text excerpt from page 15 (click to view)
AV-29BH11ENS AV-29BH11EPS AV-29BH11EES
Item BOW adjustment
Measuring instruments Signal generator Remote control unit
Test point
Adjustment part BOW 1. 2. 3. 4. 5. 6. 7.
Description Receive a cross-hatch signal. Enter the SERVICE MENU. Press the RED key on the remote control unit, then enter the H/V adjustment group. Select BOW with the UP/DOWN ( / ) key. Adjust BOW with the LEFT/RIGHT ( / ) key and the vertical line straight. Check and readjust BOW item if the adjustment becomes improper after some other geometric adjustments are done. Press the INFORMATION key and memorize the set value.
NOTE : In case where there is a bow-shaped distortion of images on the screen. (Figure)
TRAPEZIUM adjustment
Signal generator Remote control unit
TRAPEZ
1. 2. 3. 4. 5.
Parallel 6. 7.
Receive a cross-hatch signal. Enter the SERVICE MENU. Press the RED key on the remote control unit, then enter the H/V adjustment group. Select TRAPEZ with the UP/DOWN ( / ) key. Adjust TRAPEZ with the LEFT/RIGHT ( / ) key till vertical lines, especially lines at the sides of the picture frame became parallel to the both sides of picture tube as close as possible. Check and readjust TRPEZ item if the adjustment becomes improper after some other geometric adjustments are done. Press the INFORMATION key and memorize the set value.