|
Who's Online
There currently are 5805 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
4.8.5 VSM PRESET SETTING Item VSM PRESET Measuring instrument Remote control unit Test point Adjustment part [5.VSM PRESET] (BRIGHT/STD/SOFT) 1. CONT. 2. BRIGHT 3. SHARP 4. COLOUR 5. HUE (COOL/WARM/NORMAL) 1. WDR R 2. WDR G 3. WDR B Description (1) Set the ZOOM mode to FULL. (2) Select 5.VSM PRESET from the SERVICE MENU. (3) Press the [MENU] key, and set the PICTURE MODE to BRIGHT. (4) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.CONT. to 5. HUE to the values shown in the [5. VSM PRESET]. (5) Press the [MENU] key, and set the PICTURE MODE to STD. (6) Make similar adjustment as in 4 above. (7) Press the [MENU] key, and set the PICTURE MODE to SOFT. (8) Make similar adjustment as in 4 above. (9) Press the [MENU] key, and set the COLOUR TEMP to COOL. (10) Adjust the [FUNCTION UP/DOWN] and [-/+] key to bring the set values of 1.WDR R to 3. WDR B to the values shown in the table. (11) Press the [MENU] key, and set the COLOUR TEMP to WARM. (12) Make similar adjustment as in 10 above. (13) Press the [MENU] key, and set the COLOUR TEMP to NORMAL. (14) Make similar adjustment as in 10 above.
1-34 (No.YA063)
|
|
|
> |
|