|
Who's Online
There currently are 5903 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Exactly what was needed to assess the product - excellent value and great service
;
Nice to have the service manual for the Sony DCR-TRV345E now. The document is of excellent quality.
;
MACKIE HR824 26 pages English-only Service Manual contains:
1) HR824 technical overview with the description of front and rear panel switches.
2) HR824 specs
3) Block Diagram
4) Wiring Diagram
5) Packaging management
6) Spare part & final assembly list (for PCB rev A and B) + exploded view
7) Test Procedures (where, how to measure voltage...) including Test Point diagram on the PCB.
8) IC and Transistor charts.
Excellent guide: very clear, good scan quality enabling us to print readable diagram :-)
Note:
Mackie HR824 make extensive use of surface mount devices (SMD). Service on the HR824 must
only be undertaken by experienced service technicians with the right tools, experience and patience to perform surface mount rework when needed.
;
This Service manual is very well scanned and its clean to read, no any anti-theft words that un-english could understand. I got my CCD600 working with this manual and it´s clear shematics :)
;
I was very pleased with the service provided and was surprised at how good the quality was of the manual. I thought it may be a third generation copy or so, but it is as good as the websites that charge 3 times this much. I repair some electronics for family and friends without charge, so this is perfect for me. Thank you very much.
3.2
MEMORY IC REPLACEMENT
� This model uses the memory IC. � This memory IC stores data for proper operation of the video and drive circuits. � When replacing, be sure to use an IC containing this (initial value) data.
3.2.1 MEMORY IC REPLACEMENT PROCEDURE 1. Power off Switch off the power and disconnect the power cord from the wall outlet. 2. Replace the memory IC Be sure to use a memory IC written with the initial setting data. 3. Power on Connect the power cord to the wall outlet and switch on the power. 4. Receiving channel setting Refer to the OPERATING INSTRUCTIONS (USER'S GUIDE) and set the receive channels (Channels Preset) as described. 5. User settings Check the user setting items according to the "FACTORY SETTING ITEM" table. Where these do not agree, refer to the OPERATING INSTRUCTIONS (USER'S GUIDE) and set the items as described. 6. SERVICE MODE setting Verify what to set in the SERVICE MODE, and set whatever is necessary(Fig.1) . Refer to the SERVICE ADJUSTMENT for setting.
3.2.2 SERVICE MODE SETTING ITEMS
SERVICE MENU SERVICE MENU
1. V/C(S)
3. SOUND(A) 5. 3L Y/C(LYC) 7. LOW LIGHT 9. VCO 11. I2C BUS
2. DEF(D) 4. OTHERS(F)
8. HIGH LIGHT 12. SYSTEM(SYS)
SELECT BY OPERATE BY
EXIT BY EXIT
Fig.1 Setting items 1. V/C (Video setting) 2. DEF (Deflection setting) 3. SOUND(A) (Audio setting) 4. OTHERS [Do not adjust] (Factory setting) 5. 3L Y/C [Do not adjust] (Y/C Separate setting) 7. LOW LIGHT (White balance setting) 8. HIGH LIGHT (White balance setting) 9. VCO (VCO setting) 11. I2C BUS [Do not adjust] (I2C BUS setting) 12.SYSTEM (SYS) (System constant setting) Adjust Fixed Fixed Adjust Adjust Adjust Fixed Fixed A01~A08 F01~F18 LYC01~LYC12 --------SYS01~SYS25 Settings Adjust Adjust Item No. S01~S48 D01~D33
1-8 (No.YA058)
|
|
|
> |
|