There are currently no product reviews.
;
Good service, well organized. Cheap, and the service manual was as expected. A valuable service for those of us wanting to keep the old junk going!
;
The manual arrived very quickly and had all the information I needed - Very satisfied with this seller. - Thanks -
;
Good quality, the manual help me to repair the echo/reverb section
;
A good service manual with lots of info and a very fair price
;
Great value, good scan, just as expected, everything that you need.
C-13310 C-13311
STATIC CONVERGENCE ADJUSTMENT
1. Input a crosshatch signal. 2. Using 4-pole convergence magnets, overlap the red and blue lines in the center of the screen (Fig.1) and turn them to magenta (red/blue).
(FRONT VIEW )
3. Using 6-pole convergence magnets, overlap the magenta(red/blue) and green lines in the center of the screen and turn them to white. 4. Repeat 2 and 3 above, and make best convergence. Fig.1
(FRONT VIEW )
DYNAMIC CONVERGENCE ADJUSTMENT
1. Move the deflection yoke up and down and overlap the lines in the periphery. (Fig. 2)
BLUE
RED
GREEN BLUE
RED GREEN BLUE
2. Move the deflection yoke left to right and overlap the lines in the periphery. (Fig. 3) 3. Repeat 1 and 2 above, and make best convergence.
GREEN RED
BLUE
GREEN
RED
Fig.2
�
After adjustment, fix the wedge at the original position. Fasten the retainer screw of the deflection yoke. Fix the 6 magnets with glue.
(FRONT VIEW ) GREEN RED BLUE GREEN BLUE RED RED GREEN BLUE
BLUE GREEN RED
Fig.3
No. 51963
23
|