perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Text excerpt from page 11 (click to view)
1 Press and hold the clamp of the speaker
terminal on the rear of the unit.
To connect audio equipment with an optical digital input terminal
You can record CD sound onto the connected digital equipment.
2 Insert the end of the speaker cord into the
Match the polarity (color) of the speaker terminals: Âª to Âª and Â· to Â·.
3 Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
Connecting Other Equipment
You can connect both analog and digital equipment.
â¢ DO NOT connect any equipment while the power is on. â¢ DO NOT plug in any equipment until all connections are complete.
Before connecting the other equipment, remove the protective plug from the terminal. Audio equipment with an optical digital input
To optical digital input
To connect an analog component
Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.
Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the CD OPTICAL DIGITAL OUTPUT terminal.
NOW, you can plug in the unit and other connected equipment FINALLY!
When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration. To stop the display demonstration, press any button on the unit or on the remote control.
Audio/video equipment To audio output
For playing the other equipment through this unit, connect between the audio output jacks on the other equipment and AUX jacks by using audio cords (not supplied).