|
|
|
Who's Online
There currently are 5856 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
Continued
Changing the Title
You can make a correction or change the title.
1 Follow steps 1 to 5 of page 46. 2 Select the character you want to correct, referring to
step 7 on page 47. � Make sure that the character you want to change is flashing.
On the remote control: In the following example, the process is explained from the very first � that is, inserting a disc. If you have already started recording or playing, start from step 2. � To exit from the title entry screen any time during the process, press MD TITLE.
1 Insert an MD you want to edit into the MD loading
slot. � It takes about 5 seconds for the unit to read the TOC (Table Of Contents) of the inserted MD. While the unit is reading it, you cannot go to the next step.
3 Press CANCEL to delete the character you have
selected in the above step.
4 Input the correct character, referring to step 7 on
page 47.
2 Press MD TITLE.
The source is changed to �MD,� and the MD recorder enters one of the following title entry screen. � Disc title entry screen: appears when you press MD TITLE when the MD recorder stops.
5 Repeat steps 2 to 4 of the current procedure to
correct more characters.
6 Press ENTER/DEMO to finish correcting the title.
� If you want to correct another title, select another title entry mode by pushing the joy control rightward ( ) or leftward ( ), press SET, then repeat from step 2 above. � If you want to finish the correction, go to the next step. � Track title entry screen: appears when you press MD TITLE while playing, pausing, or recording.
7 Press TITLE/EDIT (or ENTER/DEMO again) to
exit from the title entry mode.
8 Press 0 for the MD recorder to eject the MD.
�WRITING� flashes while the editing you have made is being recorded on the MD. To erase all the characters Press CANCEL repeatedly in step 3 above to erase all the characters, then go to step 6.
3 Press ø (10) or � (+10) to change the title entry
mode.
EX. When track 8 is selected
� Title entry mode changes as follows: Disc title Last track title 1st track title 2nd track title 3rd track title
� 48 �
|
|
|
> |
|
