Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
Text excerpt from page 20 (click to view)
JC12 Forced eject procedures
Magazine eject does not function.
YES RESET (Press EJECT for 3 sec.) NO Check that the trays remain no more than 10 mm inside the magazine. Are trays stored in the magazine? Check visually. NO Remove the bottom cover YES Completed
Improperly positioned
NO
Is the disc set in the playing position?
YES Remove the dampers and the top cover to take out the mechanism. Rotate the third gear clockwise and unchuck the disc.
Peel off the sticker on the left side of the unit. Insert a screwdriver and press the internal lever to forcibly eject the magazine.
Completed Remove the item(s) causing the disc-jam through the clearance at the top of the lifter. Disconnect the tray from the hook.
Remove the lifter bracket (L) and return the tray to the magazine.
Place the unit with its left side facing down and apply a slight shock, then return the tray to the magazine.
Rotate the third gear clockwise until the lifter level is below the 9th tray position.
Press the magazine lock lever to eject the magazine.