|
Who's Online
There currently are 5309 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
excellent service - fast purchase - easy download - will buy from again
;
Manual is actually a pack of schematics, good quality pictures.
;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
CH-X1500RF
2.5.5 Mounting the front slider and rear slider (See fig.45, 46) (1) Position the unit with the rear side facing down, then rotate the third gear in the direction of the arrow (clockwise) until the lift arm comes to the position at which the holes are exposed. (2) Mount the front slider from the top. Rotate the third gear counterclockwise until the hole of the slider is lined up with the right hole of the stud. (3) Attach the E-washer on the shaft. (4) Position the unit with the front side facing down, then mount the rear slider. Check that the r, s and t positions are correctly mounted as shown in Fig. 46. (5) Rotate the third gear in the direction of the arrow (counterclockwise) until the lifter unit is at the top position.
E-washer Front slider
Stud
Psition so that the stud and right hole are lined up.
Rotate until the holes are lined up.
Set the holes are exposed. Lift arm Fig.45
r
s
t
Lifter unit
Fig.46
Rotate the third gear to move the slider.
1-18 (No.49804)
|
|
|
> |
|