|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
ecelent I was reciver the service manual soon I fell so happy very complete 100% positive all by this store tanks atte Luis salazar
 ;
A great copy of the manual, and the only one I could find anywhere on the net! The circuit diagrams are easily readable, all component values marked and easy to see. A highly appreciated download!
;
Great Manual. This manual is available no where else. It was exactly what I was looking for.
;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
CH-X460 Removing the mechanism board / pickup assembly (See Fig.23 to 26)
1. Remove the three screws N fixing the mechanism board on the back of the traverse mechanism. 2. Disconnect the two feed motor wires (blue and white), two spindle motor wires (red and black) and two tray motor wires (brown and black) that are soldered to the mechanism board. 3. Short-circuit the grounding point on the mechanism board. Move the mechanism board without disconnecting the wire from connector CN501. Solder the short circuit round on the pickup assembly. 4. Disconnect the wire from connector CN501 on the mechanism board. 5. Remove the screw O assembly. to remove the feed motor
Flexible wire CN501 Brown and black
Red and black
N N
Mechanism board
Blue and white
Fig. 23
6. Remove the screw P to remove the shaft holder retaining the feed slide shaft assembly and the middle gear. 7. Move the middle gear.
Pickup
8. Move the pickup assembly upward from the gear section and remove it from the traverse chassis assembly. 9. Remove the two screws Q to remove the rack arm. 10. Pull out the feed slide shaft assembly. 11. Remove the screw R to remove the spring. CAUTION: To reattach the mechanism board, connect the pickup flexible wire to connector CN501 on the mechanism board before unsoldering the short circuit round. Subsequently, fix the mechanism board using screws.
Short circuit round (Grounding point)
Fig. 24
Pickup assembly
Grounding point
P
Shaft holder Feed slide shaft assembly
R
Spring
Feed motor
Middle gear
Chassis Rack arm Pull out Remove gears and motors only when required.
Q
1-10
O
Fig. 25
Fig. 26
 $4.99 CH-X460 JVC
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
