|
|
|
Who's Online
There currently are 5501 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
What can i say but i would have been lost without your support.
Thank You!
;
Très satisfait ! envoi rapide, Grand catalogue disponible. Many thanks !
;
Delivery came quite promptly and in a very readable format. Thank you.
;
I found my Clarion VRX8370R in the Camper I bought and I wasn't able for month to understand it.
The Owner Manual was perfect and just what I was searching for.
Thank you.
Leonardo
;
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced.
Thanks, I will use you again.
How to Install
1. To install the speaker in the rear tray, first determine the appropriate area in which to place it. The speakers must be installed in a place where there are spaces of at least 32 mm over the tray and at least 49 mm under the tray. ln determining the location, make sure that the bottom part of each speaker fits into the large hole in the steel plate on which the rear tray is fixed. 2. Remove the rear tray. 3. The paper pattern printed on the bottom of the packing box shows the exact shape of the area on the rear tray through which the speaker will be installed. Apply the paper pattern onto the area determined in 1. above, and trace out the shape of the area on the tray. 4. Then, cut out the marked area. 5. The next step is to wire the speakers. Be sure to connect to connect corresponding terminals, i.e. "left" to "left", "-" to" -", etc. 6. Use the tapping screw and speed nuts provided to fix the speaker and grille to the rear tray. Match the 4 screw holes in the speaker frame and the grille to the holes in the rear tray, insert the 4 screws in into the holes and secure them with 4 nut. 7. The process for installing the speakers in the door is much the same as for installing the speakers in the rear tray. ln this case, however, extra care must be taken to install the speaker out of the way of the door handle. lnstall the speakers with the terminals down.
Tweeter Mounting
Swivel Mounting Flush Mounting Angle Mounting Surface Mounting
14
14
3
13
x2
3
x2
4
4
Woofer Mounting
12
5
1
x4
10
Network Mounting
2
x2
5 6
x2
6
x2
Amplifier
2-WAY CR OSSOVE 12dB/Oct.R NETWOR K
6
Tweeter level adjust
2-WAY CR OSSO VE 12dB/Oct.R NETWOR K
x4
INPUT
WOOFER
TWEETE R
INPUT
R
(-3dB) -3dB 0dB (-0dB) -3dB 0dB
INPUT
Tweeter
WOOFER
TWEETE
-3dB 0dB
Midwoofer
2-WAY CR
OSSO 12dB VER NETW /Oct. ORK
WOOFER
TWEE TER
1 1
6
x2
Connection
Parts
7
1 1
1 Screw
2 Screw
3 Screw
4 Screw
5 Screw nut
6 Speed nut
x8
x4 (O4x20mm) (O3.5x20mm)
x4 (O4x25mm)
x2 (O4mm)
x4 (O4 mm)
x16
Amplifier Black lined
2-WAY CROSSOVER NETWORK 12dB/Oct.
(O4x25mm)
7 Network cord 8
x2
8 Speaker cord
9 Speaker cord
x2 2m 2m
x2
INPUT
WOOFER
TWEETER
4m
Woofer
Black lined
10 Grille Ass'y
1 Network 1
12 Mounting bracket
13 Angle adaptor
14 Fix frame
2-WAY CR
OSSO VE 12dB/O R NETW ct. ORK
x2
INPUT WOOFER TWEE TER
x2
x2
9
Tweeter
x2
|
|
|
> |
|
