This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 15 (click to view)
1
Pull out the viewfinder.
Tripod Mounting
Bottom side of Power Grip
2 Set the Power Dial to �REC�. camcorder � The Power Lamp lights and the
enters the Record/Standby mode. � When the battery packs installed in the Power Grip become weak, the case�s Power Lamp begins to blink, and the lamp goes out when the battery packs have completely discharged. Replace them with two fully charged battery packs. � Be sure to set the Power Dial to "OFF" before installing charged battery packs. � While the DC Plug is connected, even as the battery packs begin to run down, the Battery Indicator on the camcorder will show the battery packs to be fully charged .
screw 1 Align the stud onand Power Grip the direction the tripod with Power Grip�s mounting socket and stud hole. Then tighten the screw.
� Refer to the tripod's instruction manual for details on mounting onto tripod.
EN-15