Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
Text excerpt from page 21 (click to view)
INITIAL SETTINGS
21
Before starting, make sure of the following:
� The TV aerial cable should be connected to the unit. � The unit�s mains power cord should be connected to a mains outlet. � Turn on the TV and select the AV mode. � Slide the TV/CABLE/SAT/DVD switch to DVD.
Auto Set Up
Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set
After the 1 button on the unit (or DVD 1 on the remote control) is pressed for the first time to turn on the unit, the Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.
A Turn on the unit.
On the unit Press 1 on the unit. On the remote control Press DVD 1 on the remote control.
� The AUTO SET/T-V LINK display appears on the TV screen.
B Perform Auto Set Up.
Press rt to move the arrow to �AUTO SET�, then press ENTER.
�AUTO� blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows �� �:� �� as illustrated on page 24.
� The AUTO SET screen will appear.
� When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 18) and the TV is turned on, the unit automatically performs the Preset Download ( pg. 23) even if you select �AUTO SET� for Auto Set Up function.
