Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
Text excerpt from page 166 (click to view)
Timer (continued)
Using the playback timer
Set the clock beforehand. (A page 15)
5
Press 2 or 3 (cursor) to select �ONCE� or �WEEKLY�, and then press SET.
ONCE WEEKLY The playback timer works once. The playback timer works weekly or every day.
1 2
Slide the remote control mode selector to RECEIVER. Press CLOCK/TIMER.
Display on the receiver
6
Press 2 or 3 (cursor) to select the desired day of the week, and then press SET.
� Each time you press 2 or 3 (cursor), the display changes as follows. When �ONCE� is selected
When �WEEKLY� is selected
(The playback timer works every day.)
� If you accidentally pressed CLOCK/TIMER twice or more, press CLOCK/TIMER repeatedly until the display shown above is displayed.
(The playback timer works Monday to Saturday.)
(The playback timer works Monday to Friday.)
3 4
Press SET. Set the starting time and ending time with 2, 3 (cursor), and then press SET.
Example: Display on the receiver when setting the starting time to 8:45
7
Press 2 or 3 (cursor) to select the desired sound source, and then press SET.
� If you have selected �FM� or �AM� in this step, press 2, 3 (cursor) or the number buttons to select the preset number of the radio station whose broadcast you want to listen to (Refer to �Using the number buttons� (A page 15)), and then press SET.
8
Press 2 or 3 (cursor) to adjust the playback volume, and then press SET.
� You can use the number buttons to specify the volume. � The settings will appear in the display window on the receiver.
Display on the receiver when setting the ending time to 9:45
� Press 2 or 3 (cursor) to select the value and press SET to set the value. � You can use the number buttons instead of 2 or 3 (cursor). Refer to �Using the number buttons� (A page 15).
