JVC EX-A10UP
Owner's Manual

Timer (continued)

Using the playback timer
Set the clock beforehand. (A page 15)

5

Press 2 or 3 (cursor) to select �ONCE� or �WEEKLY�, and then press SET.
ONCE WEEKLY The playback timer works once. The playback timer works weekly or every day.

1 2

Slide the remote control mode selector to RECEIVER. Press CLOCK/TIMER.
Display on the receiver

6

Press 2 or 3 (cursor) to select the desired day of the week, and then press SET.
� Each time you press 2 or 3 (cursor), the display changes as follows. When �ONCE� is selected

When �WEEKLY� is selected
(The playback timer works every day.)

� If you accidentally pressed CLOCK/TIMER twice or more, press CLOCK/TIMER repeatedly until the display shown above is displayed.

(The playback timer works Monday to Saturday.)

(The playback timer works Monday to Friday.)

3 4

Press SET. Set the starting time and ending time with 2, 3 (cursor), and then press SET.
Example: Display on the receiver when setting the starting time to 8:45

7

Press 2 or 3 (cursor) to select the desired sound source, and then press SET.
� If you have selected �FM� or �AM� in this step, press 2, 3 (cursor) or the number buttons to select the preset number of the radio station whose broadcast you want to listen to (Refer to �Using the number buttons� (A page 15)), and then press SET.

8

Press 2 or 3 (cursor) to adjust the playback volume, and then press SET.
� You can use the number buttons to specify the volume. � The settings will appear in the display window on the receiver.

Display on the receiver when setting the ending time to 9:45

� Press 2 or 3 (cursor) to select the value and press SET to set the value. � You can use the number buttons instead of 2 or 3 (cursor). Refer to �Using the number buttons� (A page 15).

43