|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual is very useful because it presents the technical specifications of the cd player, including the manufacturer of the reader, this helps if you need to replace it. It also displays the settings and layout of the circuit.
;
Manual was a good representation of service infomation for the EWV404. It worked well for my repair.
;
Great quality copy, right what I was looking for, all I need to fix my radio.
Thanks
;
I BOUGHT A PAIR OF INFINITY VINTAGE SPEAKERS THAT REQUIRED TO BE REPAIRED AND THE ELECTRONIC TECHNICIAN ASKED ME FOR THE SERVICE MANUAL.
I TRIED TO GET IT AT THE MANUFACTURER'S SITE WITH NO SUCCESS, SO I STARTED TO LOOK FOR IT IN THE WEB FOR A LONG TIME, UNTIL I FOUND THE SERVICE MANUAL IN THIS EXCELLENT SITE "OWNER'S MANUAL.COM".
NOW I HAVE MY SPEAKERS WORKING AND ENJOYING THE MUSIC I LIKE.
THANKS TO "OWNER`S MANUAL.COM" I RECOMMEND THIS SITE TO EVERYONE.
;
Very quick response. Very good and accurate print quality of the scanned document.
FS-P7
Removing the tuner board (See Fig.4 and 5)
Prior to performing the following procedure, remove the metal cover. 1. Disconnect the card wire from connector CN1 on the tuner board. 2. Remove the screw D on the right side of the body. 3. Remove the two screws E on the rear panel.
D
CN1 board
Fig.4
Removing the CD mechanism assembly (See Fig.6 to 8)
Prior to performing the following procedure, remove the metal cover and the rear cover. 1. Disconnect the card wires from connector CN903, CN904 and the wire from CN905 on the main board on the upper side of the body. 2. Remove the screw D attaching the tuner board and the CD mechanism on the right side of the body. 3. Remove the two screws F attaching the rear panel and the CD mechanism on the back of the body. 4. Move the rear part of the CD mechanism assembly upwards to disengage the two joints a and release from the rear panel. Pull the front panel toward the front and move the rear part of the CD mechanism assembly upwards. Then pull out the CD mechanism assembly from the front panel backward. REFERENCE: To remove the CD mechanism assembly efficiently, disconnect the card wire connecting the tuner board with the main board in advance.
E
Rear cover Rear panel
Fig.5
Rear panel Main board CN905 Tuner board
CN904 Card wires CN903
Front panel assembly
CD mechanism assembly
Fig.6
CD mechanism assembly
D
Tuner board
Fig.7
1-8
|
|
|
> |
|