I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
Text excerpt from page 15 (click to view)
3.2.13 REMOVING THE TEMP PWB (Fig.2) � Remove the REAR COVER. (1) Pull out the TEMP PWB from the claw of the TOP FRAME. 3.2.14 REMOVING THE CONTROL PWB (Fig.2) � Remove the REAR COVER. (1) Remove the 2 screws [A]. (2) Remove the CONTROL KNOB. (3) Remove the CONTROL PWB from the TOP FRAME. 3.2.15 REMOVING THE CHASSIS BASE AND TOP FRAME (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. (1) Remove the 2 screws [B]. (2) Remove the CHASSIS BASE. (3) Remove the 2 screws [C] and the 2 screws [D]. (4) Remove the TOP FRAME. 3.2.16 REMOVING THE LED PWB (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. � Remove the CHASSIS BASE. � Remove the TOP FRAME. (1) Remove the 1 screw [E]. (2) Remove the LED PWB. 3.2.17 REMOVING THE LCD PANEL UNIT (Fig.2) � Remove the REAR COVER. � Remove the BACK SHIELD. � Remove the SIDE SHIELD. � Remove the TERMINAL BRACKET. � Remove the BACK BRACKET. � Remove the CHASSIS BASE. � Remove the TOP FRAME. (1) Remove the 2 screws [F] and the 2 screws [G]. (2) Remove the BOTTOM FRAME. (3) Remove the LCD PANEL UNIT from the FRONT PANEL.