Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Text excerpt from page 26 (click to view)
26
Tally lamp PROGRAM AE
RECORDING Advanced Features
Self-Timer
You can set the delay between pressing Recording Start/ Stop and the actual start of recording. If you secure the camcorder, you (or whomever is operating the camcorder) can enter the scene before recording starts.
NOTE:
You need the RM-V705U or RM-V700U remote control unit to perform this procedure.
ENGAGE RECORD�STANDBY MODE
1
START/STOP INT. TIME REC TIME
Make sure the lens cover is open, set the power switch to CAMERA.
SET TIME DELAY
2
On the remote control, press INT. TIME to set the delay time. There are four choices, and they appear in the viewfinder in the following order (each time INT. TIME is pressed): 15S (15 seconds), 30S (30 seconds), 1MIN (1 minute) and 5MIN (5 minutes). Pressing again releases the Self-timer.
RM-V700U (optional)
OR
RM-V705U (provided with GR-AX610 only)
3 4
START DELAYED RECORDING
Press Recording Start/Stop. The tally lamp begins blinking, and the blinking speed increases about 5 seconds before recording starts. When recording begins, the lamp stops blinking but stays lit. To release when the tally lamp is not blinking, press INT. TIME continuously until � � disappears. To release when the tally lamp is blinking, press Recording Start/Stop to stop the blinking, then press INT. TIME continuously until � � disappears.
RELEASE SELF-TIMER MODE
NOTE:
If the PROGRAM AE dial is set to � automatically selected. �, 15S is