This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 45 (click to view)
SYMPTOM POSSIBLE CAUSE(S)
â The battery pack has not been attached correctly ( pg. 8). â The battery pack is not charged ( pg. 8). â The power supply has not been correctly connected ( pg. 9).
No power is supplied.
The power suddenly goes off and doesnât come back on by itself.
â The battery pack has completely discharged. â Remove the cassette and disconnect the power source, then after a few minutes, try turning the power back on. If it still doesnât come on, consult your nearest JVC dealer.
Recording cannot be performed. â The recording tapeâs Erase Protection tab is missing. Cover the hole with adhesive tape. (Some tapes have sliding tabs. In this case, check the position of the tab.) â The camcorder Power switch has not been set to âCAMERAâ ( pg. 14).
Recording does not start.
The tape is running, but thereâs no playback picture. â The TV has not been set to its VIDEO mode or channel. â If A/V connection is used, the TVâs VIDEO/TV switch has not been set to VIDEO. â The RF unit has not been set to the correct channel. â Manual Tracking has not been performed ( pg. 35).
Noise bars appear in the playback picture. Playback picture is blurred or interrupted. The counter indication is blurred during Still playback.
â The video heads are dirty or worn out. Consult your nearest JVC dealer for head cleaning or replacement. â This is normal.
The tape stops during fast-forward or rewind. Rewinding or fast-forwarding cannot be performed. â The Counter Memory Function has been activated ( pg. 35). â The tape is already fully wound on one reel or the other.