There are currently no product reviews.
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Excellant!!! Very quick and easy....Best $4.99 I have spent in a very long time..
I highly recommend this.
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
An excellent service for the price, however, it would also have been handy if the troubleshooter pages were included. The manual is only sent in the language of your country, thus it looks as though there are some pages missing. Otherwise highly recommended.
VIDEO/MEMORY Switch (GR-DVL1020/DVL820/DVL522 only)
Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing)
It is also possible to copy recorded scenes from this camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration.
[To use this camcorder as a player]
1 Make sure all units are turned off. Connect this
camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration.
2 Set this camcorderâs VIDEO/MEMORY Switch to
âVIDEOâ (GR-DVL1020/DVL820/DVL522 only), then the Power Switch to âPLAYâ while pressing down the Lock Button located on the switch, turn on the video unitâs power, and insert the appropriate cassettes in this camcorder and the video unit.
DV cable (optional)
3 Press 4 to play back the source tape. 4 While watching the playback on the monitor,
engage the DV connector-equipped video unitâs record mode from the spot on the source tape you want to begin recording.
Core filter To DV IN/OUT
Video unit equipped with DV connector
â It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. 9). â If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units. â If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed. â Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again. â If âPlayback Zoomâ ( pg. 57), âPlayback Special Effectsâ ( pg. 56) or âSnapshotâ is attempted during playback, only the original playback image recorded on the tape is output from the DV connector. â When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.
[To Use This Camcorder As A Recorder]
1. Set this camcorderâs VIDEO/MEMORY Switch to âVIDEOâ (GR-DVL1020/DVL820/DVL522 only), then the Power Switch to âPLAYâ while pressing down the Lock Button located on the switch. 2. Set âREC MODEâ to âSPâ or âLPâ in the Menu Screen ( pg. 50). 3. Connect the DV cable as shown in the illustration and load a cassette to record on. 4. Press the Recording Start/Stop button to engage the Record-Pause mode. â DV. IN â appears on the screen. 5. Press the Recording Start/Stop button to start recording. rotates. 6. Press the Recording Start/Stop button again to engage the Record-Pause mode. stops rotating.
â Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current âSOUND MODEâ setting ( pg. 47). â During Digital Dubbing, no signals are output from the video or audio connectors.