Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
Text excerpt from page 23 (click to view)
EN23
1 2 3 4 5
Make sure all units are turned off. Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 22). If using a VCR . . . go to step 3. If not . . . go to step 4. Connect the VCR output to the TV input, referring to your VCR�s instruction manual. Turn on the camcorder, the VCR and the TV. Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
NOTES: � It is recommended to use the AC Adapter as the power supply instead of the battery pack
( pg. 9). � To monitor the picture and sound from the camcorder without inserting a tape or memory card*, set the camcorder�s Power Switch to � � or � �, then set your TV to the appropriate input mode.
� Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on. � If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
* GR-DVL557/DVL555/DVL357/DVL355 only
To choose whether or not the following displays appear on the connected TV . . . �Date/Time .... set �DATE/TIME� to �AUTO�, �ON� or �OFF� in the Menu Screen ( pg. 50). �Time Code .... set �TIME CODE� to �ON� or �OFF� in the Menu Screen ( pg. 50). �Playback Sound Mode, Tape Speed And Tape Running Displays for video playback Or Directory/File Names and Image Number/Total Number of Images for D.S.C. Playback
(GR-DVL557/DVL555/DVL357/DVL355 only)
.... set �ON SCREEN� to �LCD� or �LCD/TV� in the Menu Screen ( pg. 50). Or, press DISPLAY on the remote control (provided).
