|
Who's Online
There currently are 5946 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
EN29
PIN-UP Pin-Up mode*
To Delete Unwanted Still Images . . . .... when unwanted still images are stored in the memory card or its memory is full, refer to �Deleting Files� ( pg. 34) and delete unwanted still images. To Remove The Shutter Sound . . . .... when you do not want to hear the shutter sound, set �BEEP� to �OFF� in the Menu Screen ( pg. 40, 42). The sound is no longer heard from the speaker.
FRAME Snapshot mode with frame*
FULL Snapshot mode with no frame*
NOTES: � Even if �MULTI-4� or �MULTI-9� is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom or Night-Scope ( pg. 48). � The image is stored in the VGA mode regardless of the image size mode setting ( pg. 17) if �MULTI-4� or �MULTI-9� is engaged. � If SNAPSHOT is pressed when �DIS� is set to �ON� ( pg. 41), the Stabiliser will be disabled. � If Snapshot recording is not possible, � � blinks when SNAPSHOT is pressed. � If Program AE with special effects ( pg. 48) is
�
MULTI-4 Multi-Analyzer 4
� �
MULTI-9 Multi-Analyzer 9
�
�
engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. If shooting is not performed for approx. 5 minutes when the Power Switch is set to � � or � � and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, push back and pull out the viewfinder again or close and re-open the LCD monitor. The Motor Drive mode ( pg. 52) is disabled when the VIDEO/MEMORY Switch is set to �MEMORY�. When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape. Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibility with devices which are not compliant to DCF. In the XGA mode, images are shot in 720 x 576 pixels and they are converted and stored in the XGA mode file size (1024 x 768 pixels).
* There is the sound effect of a shutter closing.
|
|
|
> |
|