|
Who's Online
There currently are 6041 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
EN27
PIN-UP Pin-Up mode*
To Delete Unwanted Still Images . . . .... when unwanted still images are stored in the memory card or its memory is full, refer to �Deleting Files� ( pg. 32) and delete unwanted still images. To Remove The Shutter Sound . . . .... when you do not want to hear the shutter sound, set �BEEP� to �OFF� in the Menu Screen ( pg. 38, 40). The sound is no longer heard from the speaker.
FRAME Snapshot mode with frame*
FULL Snapshot mode with no frame*
NOTES: � Even if �MULTI-4� or �MULTI-9� is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom or Night-Scope ( pg. 45). � The image is stored in the VGA mode regardless of the image size mode setting ( pg. 15) if �MULTI-4� or �MULTI-9� is engaged. � If SNAPSHOT is pressed when �DIS� is set to �ON� ( pg. 39), the Stabiliser will be disabled. � If Snapshot recording is not possible, � � blinks when SNAPSHOT is pressed. � If Program AE with special effects ( pg. 46) is
�
MULTI-4 Multi-Analyzer 4
� �
MULTI-9 Multi-Analyzer 9
�
�
engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. If shooting is not performed for approx. 5 minutes when the Power Switch is set to � � or � � and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, push back and pull out the viewfinder again or close and re-open the LCD monitor. The Motor Drive mode ( pg. 50) is disabled when the VIDEO/DSC Switch is set to � �. When a cable is connected to the AV connector, the shutter sound is not heard from the speaker, however it is recorded onto the tape. Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibility with devices which are not compliant to DCF. In the XGA mode, images are shot in 720 x 576 pixels and they are converted and stored in the XGA mode file size (1024 x 768 pixels).
* There is the sound effect of a shutter closing.
|
|
|
> |
|