There are currently no product reviews.
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
the manual was very helpful thank you very much no one else was able to help me thanx
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
This feature lets you record still images that look like photographs onto a tape.
â To remove the shutter sound, âBEEPâ on pg. 23. â If Snapshot recording is not possible, âPHOTOâ ^ blinks when SNAPSHOT 5 is pressed. â If Programme AE with special effects ( pg. 16) is engaged, certain modes of Programme AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks. â If SNAPSHOT 5 is pressed when âDISâ is set to âONâ ( pg. 22), the Stabiliser will be disabled. â During tape playback as well, all snapshot modes are available. However, the shutter sound is not heard. â During Snapshot recording, the image displayed in the viewfinder may be partially missing. However, there is no effect in the recorded image. â When a cable is connected to the S/AV connector #, the shutter sound is not heard from the speaker, however it is recorded onto the tape.
SNAPSHOT MODE SELECTION
â while pressing down the Lock Button 0 located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.
1 Set the Power Switch 8 to â
2 Press MENU 2. The Menu Screen appears. 3 Press + or â 3 to select â (CAMERA)â, then
press SELECT/SET 1.
4 Press + or â 3 to select âSNAP MODEâ, then press SELECT/SET 1. 5 Press + or â 3 to select the desired Snapshot
mode, then press SELECT/SET 1. Press + or â 3 to select â RETURNâ and press SELECT/SET 1 twice. The Menu Screen closes.
The camcorderâs Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing):
FULL Snapshot mode with no frame
PIN-UP Pin-Up mode
FRAME Snapshot mode with frame
â¢ When two subjects overlap in the same scene. â¢ When illumination is low.* â¢ When the subject has no contrast (difference in brightness and darkness), such as a flat, one-colour wall, or a clear, blue sky.* â¢ When a dark object is barely visible in the viewfinder.* â¢ When the scene contains minute patterns or identical patterns that are regularly repeated. â¢ When the scene is affected by sunbeams or light reflecting off the surface of a body of water. â¢ When shooting a scene with a high-contrast background.
* The following low-contrast warnings appear blinking: ,, and
There is the sound effect of a shutter closing.
1 Press SNAPSHOT 5. âPHOTOâ ^ appears while the snapshot is being taken.
If you press during Record-Standby . . . ..... âPHOTOâ ^ appears and a still image will be recorded for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode. If you press during Recording . . . ..... âPHOTOâ ^ appears and a still image will be recorded for approx. 6 seconds, then the normal recording resumes. â¢ Regardless of the Power Switch 8 position (â â or â â), Snapshot recording takes place using the selected Snapshot mode. Motor Drive Mode Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)
â If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean, wiping with a piece of soft cloth if it gets dirty. When condensation occurs, wipe with a soft cloth or wait for it to dry naturally. â When shooting a subject close to the lens, zoom out first ( pg. 12). If zoomed-in in the auto focus mode, the camcorder may automatically zoom out depending on the distance between the camcorder and the subject. This will not occur when âTELE MACROâ ( pg. 22) is activated.
18 FOR RECORDING
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…