There are currently no product reviews.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
the manual was very helpful thank you very much no one else was able to help me thanx
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
Setting clock semiautomatically
â Semiauto Clock Set
You can change the host channel/D.S.T. /time zone setting manually. First follow steps 1 to 3 on page 10, then go to the following steps.
6 Select D.S.T. mode
You have three choices: AUTOâ Select if you want to adjust your VCRâs clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*) ONâ Adjustment will be made by the clock itself. OFFâ Select when Daylight Saving Time does not apply to you. On the front panel: Press OK to move the highlight bar to âD.S.T.â, then press CH5â repeatedly until the desired setting is selected.
4 Set Auto Clock to ON
On the front panel: Press OK to move the highlight bar to âAUTO CLOCKâ, then press CH5â so that âONâ is selected.
CLOCK SET TIME DATE YEAR 1:00PM 12/24 00 SUN AUTO CLOCK : ON HOST CH : AUTO (CATV) D.S.T. : AUTO TIME ZONE : AUTO PRESS (5,â), THEN (OK) PRESS (MENU) TO END
On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to âAUTO CLOCKâ, then press SHUTTLE PLUS 5â so that âONâ is selected. Then; To select the host channel â go to step 5. To select the D.S.T. mode â go to step 6. To select the time zone â go to step 7.
On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to âD.S.T.â, then press SHUTTLE PLUS 5â repeatedly until the desired setting is selected.
7 Select time zone
You can select the time zone automatically or On the front panel: Press OK to move the highlight bar to âTIME ZONEâ, then press CH5â repeatedly until âAUTOâ or the desired time zone is selected. Each time you press the button, the time zone
The time that has been set previously will be erased when âAUTO CLOCKâ, âHOST CHâ, âD.S.T.â or âTIME ZONEâ setting is changed.
You can either select âAUTOâ or enter a PBS
Select host channel
On the front panel: Press OK to move the highlight bar to âHOST CHâ, then press CH5â repeatedly until âAUTOâ or the desired PBS channel number is selected. On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to âHOST CHâ, then press SHUTTLE PLUS 5â until âAUTOâ or the desired PBS channel number is selected.
= AUTO= ATLANTIC= EASTERN = CENTRAL = MOUNTAIN = PACIFIC = ALASKA = HAWAII = (back to the beginning) On the Remote: Press SHUTTLE PLUS 3 to move the highlight bar to âTIME ZONEâ, press SHUTTLE PLUS 5â repeatedly until âAUTOâ or the desired time zone is selected (see above).
changes as follows:
If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected "AUTO" for the host channel in step 5, be sure to select the correct time zone manually.
Some PBS channels do not transmit clock setting data.
8 Return to normal screen
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCRâs clock at the start and end of Daylight Saving Time. With Auto DST activated, . . . ... on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM. ... on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.
Turn off the VCR after performing Semiauto Clock Set. âAutoâ will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.
Quick start guide ( sometimes called quick guide ) contains most important information on how to use…