Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 30 (click to view)
PLAYBACK/RECORDING ON DV DECK
Turn on the TV and select the AV mode.
A Load a cassette.
Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.
â Do not apply too much pressure when inserting. â The recorderâs power comes on automatically. â If the erase protection switch is set to âSAVEâ, playback begins automatically. It takes about 15 seconds until the playback picture appears. â Make sure the VCR indicator appears on the front display panel. If not, press TV/VCR on the remote control to turn on the VCR indicator.
B Select the DV deck.
1 3 2
â The DV button lights on the recorder.
C Find the programme start point.
If the tape is advanced past the start point, press 3 or turn the JOG dial to the left. To go forward, press 5 or turn the JOG dial to the right.
D Start playback.
â The DV playback indicator lights on the recorder.
E Stop playback.
Press 8. Then press
â The DV playback indicator turns off.
to remove the cassette.
1 4 7
2 5 8 0
3 6 9
3 4 4
Only cassettes marked deck. can be used with the DV
When you record a tape on the DV deck with the recording speed set to âLPâ, it is recommended to play back that tape back on this DV deck. Digital video recorder from other manufacturers may not be able to play back the tape properly.