5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 36 (click to view)
36 EN
TIMER RECORDING
®
SHOWVIEW Timer Programming
With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize. You can use the remote control with LCD panel to enter the SHOWVIEW number.
A Turn on the recorder.
Press 1.
B Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety tab intact.
OR
Insert a Mini DV cassette with the erase protection switch set to �REC�.
Before performing the SHOWVIEW Timer Programming:
C Select the deck.
Press VHS or DV.
� Make sure that the recorder�s built-in clock is set properly. � Turn on the TV and select the AV mode.
D Access the SHOWVIEW display.
Press LCD PROG.
The LCD panel looks like this: LCD panel
E Enter the SHOWVIEW number.
1 2
1 4 7
2 5 8 0
3 6 9
3 4 4
� If you make a mistake, press & and input the correct number. The SHOWVIEW number you enter appears on the LCD panel:
Press the number keys to enter the SHOWVIEW number of a programme you wish to record.
1 2
3
F Transmit the SHOWVIEW number.
Press to transmit the SHOWVIEW number from the remote control to the recorder.
� If the number you entered is invalid, �ERROR� appears on the TV screen and �Err� appears on the front display panel. Input a valid SHOWVIEW number.
