JVC HR-J748EH
Owner's Manual

EN

23

Recording Features
V / C R
q

Record One Programme While Watching Another
If your recorder is connected to the TV via AV connection, . . . . . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.

SELECT CHANNEL TO WATCH

1

Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

� The programme selected with the TV�s channel controls appears on the TV screen while the one selected with the recorder's TV PROG. buttons is recorded on the tape. � If a decoder is connected to the recorder ( pg. 35), you can select a scrambled channel as well with the TV channel controls.

TV PROG. COUNTER RESET

Elapsed Recording Time Indication
You can check the exact time of a recording.
DISPLAY
2

SET COUNTER DISPLAY

1 4 7

2 5 8 0

3 6 9
4

1 2
TV PROG.

Press DISPLAY until a counter reading appears on the dispay panel.

RESET COUNTER
Press C.(COUNTER) RESET before starting recording or playback. � The counter is reset to �0:00:00� and shows the exact elapsed time as the tape runs.

C.RESET

T V
3

Tape Remaining Time

DISPLAY REMAINING TIME

1

1

Press DISPLAY until the time remaining on the tape appears. � By pressing the DISPLAY button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.
* channel position is not displayed during playback.

NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "- - : - -" may sometimes appear, or the display may blink on occasion.