There are currently no product reviews.
Great manual, great price. I am very pleased with Owner-Manuals.com, quick service, fast communication. Will definitely use this site again.
Hello from Germany - thank you very much for the manual for my Sharp "Searcher" - the handling of your internet area is outstanding..Mike
I am very happy with the owner's manual. I bought a used Casio and was so relieved that I was able to get a hold of a owner's manual. It was very easy to download the manual and I had no problems with printing it. Thank you! Nancy Whalen
The purchased manual is an high-quality scan of the original JVC paper-based OwnerΒ΄s Manual. I am very satisfied!
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
Video Channel Set
Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.
The video recorder is designed to send picture and sound signals via the connected RF cable to your TV on UHF channel 36. After you have turned on the recorder, set your TV to UHF channel 36, fine-tune as necessary, and check if picture and sound being received from the recorder come out clearly or not: â If clear enough you don't have to perform the following steps. Go to "Installing/Removing the lithium battery" on this page. â If not UHF channel 36 or neighbouring channels may be occupied by local stations. Perform the following steps to change the Video Channel to another channel between 32 â 40. Before starting, make sure of the following: â The recorder's power should be off. â No cassette should be inserted in the recorder. â The connected TV's power should be on.
SET TV CHANNEL
The channel on which the screen to the left appear clearly in step 3 is your Video Channel.
Set your TV to a channel between 32 and 40 that you want to use as the Video Channel on the TV.
BRING TEST SIGNAL ON SCREEN
Hold down the recorder's STOP/EJECT button for more than 5 seconds. â "â OUT" appears on the display panel.
TUNE YOUR RECORDER
Turn the RF output channel adjustment screw on the rear panel of the recorder by using a screwdriver until the two vertical bars become as clear as they can be.
To view picture signals from the video recorder, set your TV to the Video Channel.
EXIT VIDEO CHANNEL SET MODE
Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened. in.
Press the recorder's STOP/EJECT button again to finish the setting.
Installing/Removing the lithium battery 1 Make sure that the power plug is connected to an AC outlet
and turn off the VCR power.
2 Open the battery cover while pressing the release tab as 3 Insert a lithium battery with the plus (+) side up and push it
ward using a pointed non-metallic object, then pull out the lithium battery. 4 Close the battery cover until it clicks in place. illustrated.
â To remove the lithium battery, press the latch A down-
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…