very helpful, the information in these manuels are very detailed
Text excerpt from page 9 (click to view)
Use the following procedure to record TV programmes on a blank video tape.
Editing To/From Another Recorder
â¢ To record TV programmes, the video cassette player must be connected to the TV as shown in connection B of the âConnectionsâ section. â¢ Turn on the power of the TV and video cassette player. â¢ Make sure that the video cassetteâs safety tab is intact. If it has been removed, cover the hole with adhesive tape.
40 32 10-
K G AUDIO
NTSC ON PAL TV NTSC3.58 NTSC4.43
- VOLUME + TV/VIDEO TVCH
- TRACKING +
RECORDING & PLAYBACK
K G AUDIO
REMOTE CONTROL UNIT
Load a blank video tape. Press the Record Â¶ button to start recording. (On the remote control unit press the Record Â¶ and Play 3 button at the same time.) The recording indicator will light during recording.
TV Receiver VIDEO CHANNEL
1 2 3
Connect the playerâs AUDIO and VIDEO OUT connectors to the recorderâs AUDIO and VIDEO IN connectors. Put the player in the Play mode. Put the recorder in the Record mode.
7 Press the Stop/Eject Â§ button or the remote controlâs Stop & button to stop recording. To stop recording temporarily: 7 Press the Pause 8 button. The recording indicator will blink. Press the Play 3 button to resume recording. Notes: â¢ To engage recording standby, press the Record Â¶ button and then press the Pause 8 button. The recording indicator will blink during recording standby. Press the Play 3 button again to start recording. â¢ If the Record button does not work, check to see if the cassette safety tab has been removed. â¢ The player automatically stops when record-standby continues for more than 5 minutes. â¢ The video tape will be rewound automatically when the end of the tape is reached.
Notes: â¢ NTSC tapes being played back in the NTSC PLAYBACK ON PAL TV mode cannot be dubbed to another recorder. â¢ When you dub an NTSC tape using your recorder as the playback deck, select NTSC 3.58 (or 4.43) with the Colour System Output switch. Important: 7 To edit, both the player and the recorder must be of the same colour system. Press your recorderâs Colour system switch to select the appropriate colour system.