There are currently no product reviews.
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
Copy of genuine owners/operators manual, very useful
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other componentsâ instruction manuals for connection and its operations.
Example 3: When another VCR is S-VHS VCR and when using this VCR as the recording VCR
This VCR (for recording) To AUDIO input To S-VIDEO input
A Make connections
Example 1: When another VCR is VHS VCR
This VCR To AUDIO/VIDEO IN To AUDIO/VIDEO OUT Audio cable (not supplied) S-video cable (not supplied)
When using this VCR as the recording VCR, connect this VCRâs AUDIO/VIDEO IN connectors to the audio/video output connectors on another VCR.
When using this VCR as the playback VCR, connect this VCRâs AUDIO/VIDEO OUT connectors to the audio/video input connectors on another VCR.
To audio output
To S-video output
Another VCR (for playback)
B Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
To audio/video output Another VCR To audio/video input
C Select input mode on recording VCR
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select âF-1â â when connecting the other VCR to the audio/video input connectors on the front panel. Press AUX or CHr/t on the Remote. Or on the VCR, press PAUSE[CH], and then FF[CH+] or REW[CHâ]. See step 2 in âBasic Recordingâ ( pg. 9).
â If another VCR is monaural, connect this VCRâs AUDIO L IN (or OUT) connector to the audio output (or input) connector on another VCR. Example 2: When another VCR is S-VHS VCR and equipped with S-VIDEO input connector.
This VCR (for playback) To AUDIO OUT To S-VIDEO OUT
D Select video input connector on recording VCR
When using this VCR as the recording VCR, select the appropriate mode ( pg. 12). When using S-VIDEO input connector on the front panel, set âFRONT AUX INPUTâ to âS-VIDEOâ. When using VIDEO input connector on the front panel, set âFRONT AUX INPUTâ to âVIDEOâ.
E Select edit mode
Audio cable (not supplied) S-video cable (not supplied)
Set the edit mode to âONâ for the VCRs if such a mode is equipped. â On this VCR, set âPICTURE CONTROLâ to âEDITâ ( pg. 11).
F Start playback
Press PLAY (4) on the playback VCR.
G Start recording
Press REC (7) on the recording VCR.
To video input To S-video input
Various connection for editing tapes
The following three methods can be used for editing tapes. â VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing. â S-VHS to VHS editing (VIDEO-VIDEO connection): Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing. â S-VHS to S-VHS (S-VIDEO connection): Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs.
Another VCR (for recording)
â 13 â