|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Editing
Editing with another VCR
You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components� instruction manuals for connection and its operations.
Example 3: When another VCR is S-VHS VCR and when using this VCR as the recording VCR
This VCR (for recording) To AUDIO input To S-VIDEO input
A Make connections
Example 1: When another VCR is VHS VCR
Audio cable (not supplied) This VCR To AUDIO/VIDEO IN To AUDIO/VIDEO OUT S-video cable (not supplied)
To audio output
To S-video output
When using this VCR as the recording VCR, connect this VCR�s AUDIO/VIDEO IN connectors to the audio/video output connectors on another VCR.
When using this VCR as the playback VCR, connect this VCR�s AUDIO/VIDEO OUT connectors to the audio/video input connectors on another VCR.
Another VCR (for playback)
B Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
C Select input mode on recording VCR
To audio/video output Another VCR To audio/video input
Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select �F-1� � when connecting the other VCR to the audio/video input connectors on the front panel. Press AUX or CHr/t on the Remote. Or on the VCR, press PAUSE[CH], and then FF[CH+] or REW[CH�]. See step 2 in �Basic Recording� ( pg. 10). When using this VCR as the recording VCR, select the appropriate mode ( pg. 14). When using S-VIDEO input connector on the front panel, set �FRONT AUX INPUT� to �S-VIDEO�. When using VIDEO input connector on the front panel, set �FRONT AUX INPUT� to �VIDEO�.
� If another VCR is monaural, connect this VCR�s AUDIO L IN (or OUT) connector to the audio output (or input) connector on another VCR. Example 2: When another VCR is S-VHS VCR and equipped with S-VIDEO input connector.
This VCR (for playback) To AUDIO OUT To S-VIDEO OUT
D Select video input connector on recording VCR
E Select edit mode
Set the edit mode to �ON� for the VCRs if such a mode is equipped. � On this VCR, set �PICTURE CONTROL� to �EDIT� ( pg. 13).
F Start playback
Press PLAY (4) on the playback VCR.
Audio cable (not supplied) S-video cable (not supplied)
G Start recording
Press REC (7) on the recording VCR.
Various connection for editing tapes
The following three methods can be used for editing tapes. � VHS to S-VHS editing (VIDEO-VIDEO connection): Although the picture quality is inherently limited by the original VHS quality, the edited tape has better picture quality than those made by VHS-to-VHS editing. � S-VHS to VHS editing (VIDEO-VIDEO connection): Since the original source is recorded in S-VHS mode, the edited tape has better picture quality than those made by VHS-to-VHS editing. � S-VHS to S-VHS (S-VIDEO connection): Original picture quality of S-VHS made can be duplicated with minimal picture degradation. This is the best editing method you can use on S-VHS VCRs.
To video input
To S-video input
Another VCR (for recording)
� 15 �
|
|
|
> |
|
