There are currently no product reviews.
The manual is complete with excellent quality! One suggestion, show number of pages and weather it is multi-lingual. The AD 600 Manuel is about 76 pages and over half is non English. This results in a larger print job than usually needed. Having this information, one could select the desired pages for printing.
I've been looking for a copy of the original user/owner manual. Just what the doctor ordered, thank you.
the manual was very helpful thank you very much no one else was able to help me thanx
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
Specifying recording length â Instant Timer Recording (ITR)
During recording, press REC (7) on the VCR repeatedly until the recording length you want appears on the display panel. The record indicator ( ) on the display panel starts blinking. â Each time you press the button, recording length increases in 30-minute intervals (up to 6 hours). â The VCR shuts off after recording is finished. â To cancel an ITR, press STOP (8) on the Remote or STOP/EJECT (0) on the VCR.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with adhesive tape.
Record safety tab
A Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette. â The VCR turns on, and the counter on the on-screen display is reset, automatically.
Watching one program while recording another
During recording... â If you connect the TV and the VCR only using the RF connection ( pg. 5) to view pictures from the VCR, press TV/ VCR on the Remote so that VCR mode indicator goes off from the display panel. (The TV broadcast being recorded disappears.) â If you are using the AV connection ( pg. 5) to view pictures from the VCR, change the TVâs input mode from AV to TV. Then, select the channel you want to watch, on the TV.
B Select recording channel
Press CH+/â or the Number keys on the Remote. Or push the JOG dial, then turn it to the left or right. â If you connect the TV and the VCR only using the RF connection, press TV/VCR on the Remote so that the VCR mode indicator lights on the display panel, to view the program to be recorded.
C Set tape speed
Press SP/EP. The selected tape speed will appear on the TV screen.
Second Audio Recording
This VCRâs built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set â2ND AUDIO RECORDâ to âONâ ( pg. 15).
You can select tape speed in the stop mode or during recording pause mode.
D Start recording
On the VCR, press REC (7). Or on the Remote, while holding REC (7), press PLAY (4). If âVIDEO CALIBRATIONâ is set to âONâ ( pg. 15) (default setting), the VCR takes about 7 seconds to assess the quality of the tape in use, then recording begins with the picture level optimized.
S-VHS (Super VHS), S-VHS ET or VHS Recording Mode
This VCR can record in S-VHS (Super VHS), S-VHS ET or VHS. â To record in S-VHS: Set âS-VHS MODEâ to âONâ ( pg. 16). Then, insert a cassette marked âS-VHSâ. The S-VHS indicator lights up on the display panel. The S-VHS recording mode is selected. â To record in S-VHS ET on a VHS cassette: Set âS-VHS ETâ to âONâ ( pg. 15). Then, insert a cassette marked âVHSâ. The S-VHS indicator lights up on the display panel. â To record in VHS: Insert a cassette marked âVHSâ. Set âS-VHS ETâ to âOFFâ ( pg. 15). â To record in VHS on an S-VHS cassette: Insert a cassette marked âS-VHSâ. The S-VHS indicator lights up on the display panel. Then, set âS-VHS MODEâ to âOFFâ ( pg. 16). The S-VHS indicator goes off. The VHS recording mode is selected.
Pause recording Press PAUSE (9). â Press PLAY (4) to resume recording. â You can select channel in the recording pause mode. Stop recording Press STOP (8) on the Remote. OR Press STOP/EJECT (0) on the VCR.
If the tape reaches its end during recording, the recording stops and â â and â$â on the display panel blink. Press STOP/EJECT (0) on the VCR to eject the cassette or press REW (3) on the Remote to rewind the tape.
When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator lights up on the display panel regardless of the âS-VHS ETâ or âS-VHS MODEâ setting. ( pg. 15, 16)
â 11 â
Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…