There are currently no product reviews.
El producto satisface las necesidades del servicio t
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
ItΒ΄s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
SECTION 2 MECHANISM
2.1 Before disassembling 2.1.1 Notes This modelâs mechanism relates closely to the rotary encoder and system control circuit (the rotary encoder is meshed with the control cam). The system control circuit detects the mechanism condition using the rotary encoderâs phase (internal switch phase). Therefore, the parts such as the rotary encoder, control plate, loading gear and control cam need to be installed correctly in order for the mechanism to operate properly. (For the mechanism phase adjustment, refer to the installation of each part.) â¢ For the disassembly procedure of the major parts of the main unit and notes, refer to the âsection 1 disassemblyâ. â¢ Before using a soldering iron, be sure to disconnect the power plug from the AC outlet. â¢ Do not touch any of the adjustment points until a defect position is specified. â¢ When plugging or unplugging the connector, be sure not to damage the wire. â¢ Be sure the springs are hooked all the way around and in the correct direction. â¢ When performing repairs, take care not to damage a catch, etc. 2.1.3 Setting the mechanism assembling mode The mechanism-assembling mode is provided with this mechanism. When disassembling and assembling, it is required to engage this mode. Set the mode by adopting the following procedures. (1) Remove the mechanism assembly using the disassembling procedure. (2) Turn gear (a) of the loading motor manually to set the mechanism assembly to the eject end mode. Make sure that the main deck is connected to the guide hole (a) of the drive lever and the seal (a) of the main deck is connected to the mark âEâ of the control plate. This condition is called the mechanism-assembling mode.
Guide hole (a)
âEâ mark CONTROL PLATE DRIVE LEVER
NG not hooked all the way around
2.1.2 Mechanism operation check When the mechanism is operated without a cassette loaded, operate the mechanism in the mechanism service mode. (Refer to the "section 1 disassembly".)