I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
I was so pleased to get the owner`s manuel within one hour! Thanks again.
Regards
Werner
Text excerpt from page 38 (click to view)
38
advanced features
Picture Quality
Manual Tracking
Your VCR is equipped with automatic tracking control. This will be adequate for most tapes and will automatically adjust the tracking to suit the particular tape in use but if you insert an old or worn tape, it may be necessary to manually adjust the tracking in order to get the best picture. If automatic tracking fails, you will notice noise bars appearing across the picture; you can correct this by manually overriding the tracking using the following steps.
adjust tracking manually During playback, use the PR + or � buttons to adjust the tracking manually.
NOTE: When a new tape is inserted, the VCR returns to automatic tracking.
Picture Control
This feature allows you to select the most appropriate picture quality according to the type of tape or use of this VCR. The default setting is OFF. EPC get to the main menu Press MENU. Select the icon EPC using the * and Tbuttons and press OK.
select picture control mode Select the desired mode using the ^ and & buttons and press * or T.
OFF:
SOFT: SHARP:
Picture quality is not adjusted. Reduces image coarseness when viewing overplayed tapes containing lots of noise. Clearer, sharper-edged picture when viewing images with lots of flat, same-coloured surfaces such as cartoons.
return to normal screen Press MENU.
NOTE: You can perform EPC setting only during playback.
