There are currently no product reviews.
It is perfect, exactly what we needed. It's like the paper version but less clutter.
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Immediate response with excellent service - highly reccommended
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
8 Set tape speed
Press SP/EP to set the tape speed. Press PROG. or OK.
â Even if a power failure occurs, the VCR keeps your timer
9 Return to normal screen
âPROGRAM COMPLETEDâ appears on the screen for about 5 seconds, then normal screen appears. â¢ If âPROGRAM NOT COMPLETED PROGRAM OVERLAPâ appears, you have another program overlapping the program you have just made. The Program Check screen appears and conflicting programs will start blinking. You can now correct the conflicting programs. See âWhen programs overlap each otherâ on page 31.
â â â
programs. However, the clock time, channel settings, and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, the following will take place. 1. This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting. 2. If the clock time and channel setting are restored correctly, each timer program you have made will start unless its end time already passes. Programs that start after midnight must have the next dayâs date. After timer recording is completed, the VCR turns off automatically. You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded. If the tape reaches its end during timer recording, the cassette is automatically ejected. To timer-record cable channels, be sure to keep the cable box turned on with the correct channel selected.
0 Engage timer recording standby mode
The VCR turns off automatically and ââ°â is displayed on the front panel display.
To timer-record daily (MondayâFriday) or weekly serials
Press DAILY (MâF) (number â8â) or WEEKLY (number â9â) anytime during steps 3 through 9. âDAILYâ or âWEEKLYâ appears on the Program screen. â Pressing the button again makes the corresponding indication disappear.
To use the VCR while it is in timer recording standby mode
Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR. DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want. â When âAUTO TIMERâ ( pg. 33) is set to âONâ, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.
Quick start guide ( sometimes called quick guide ) contains most important information on how to use…