There are currently no product reviews.
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
good scans, all is clear. all pages in order. recommended
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Read and perform this adjustment when repairing the circuits or replacing electrical parts or PCB assemblies.
1. BASIC ADJUSTMENT
1-1: SWITCHING POINT
MODE-PLAYBACK Input Signal-Alignment Tape (MHP) INSTRUCTIONS 1. Connect CH-1 on the oscilloscope to TP3002 and CH-2 to TP8001. 2. Playback the alignment tape. (MHP) 3. Press and hold the Tracking-Auto button on the remote control more than 2 seconds to set tracking to center. 4. Press both CH UP button on the set and the STOP button on the set for more than 2 seconds.
CD502 CP651 CP1701 CP8002
ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (Connector Connections)
D 1 0 2 J8009 C
CP8502 CP4001 CP4002
J8001 TP8001 (SWITCHING POINT) J8005
CP102 TU301 TP3001 (SERVICE MODE)
TP3002 (SWITCHING PULSE) TP101 (ENVELOPE)