perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 21 (click to view)
Using the TV�s menu COLOUR You can adjust the picture colour. 2 : lighter 3 : deeper TINT You can adjust the picture tint. 2 : reddish 3 : greenish � You can change the TINT setting (picture tint) only when the colour system is NTSC 3.58 or NTSC 4.43. � You cannot select the TINT function when receiving the Progressive video signal (525P signal). To return to the default settings in each PICTURE MODE: Press the blue button. This will return the picture settings in the currently chosen PICTURE MODE to the default settings, and stores them in the PICTURE MODE again.
PICTURE FEATURES menu
DIGITAL VNR
The DIGITAL VNR function cuts down the amount of noise in the original picture. AUTO: The TV will be automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture. � If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can. MAX: The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX. � The MAX setting is not suitable for high-quality pictures which contain a lot of noise. OFF: The level of the DIGITAL VNR effect is set to OFF. MIN: The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN. � The MIN setting is not suitable for lowquality pictures which contain a lot of noise.
WHITE BALANCE
You can select one of three WHITE BALANCE modes (three tones of white) to adjust the white balance of the picture. Since white is the colour which is used as a reference for all the other colours, changing the WHITE BALANCE mode affects the appearance of all the other colours on the screen. COOL: A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. MID: The normal white colour. WARM: A radish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films. � You cannot select the WHITE BALANCE function in the 16:9 mode of the ZOOM function.
