|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
;
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
;
Excellant!!! Very quick and easy....Best $4.99 I have spent in a very long time..
I highly recommend this.
;
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
SAFETY PRECAUTIONS
ENGLISH
� This installation requires technical skills and electrical acknowledgment. It is very dangerous to install this kit by yourself. For installation, consult JVC authorized dealer. � Some of the parts, such as rear panel and blank panel, are very heavy and have keen edges. Be careful when handling them. This Video Input unit allows the Plasma Display Monitor GM-P420PCE and GM-P421PCE to cope with video signals � Video (composite), S-video(Y/C), and Component/RGB � and audio signals.
Preparation
Tools: Work table:
Plus (+) screwdriver Prepare a table with a flat surface 105 cm x 65 cm or wider, and place a suitable cushion or soft cloth on it.
INSTALLATION
1 2
Turn off the power of the Plasma Display Monitor and then disconnet the power cord.
AUDIO MAKE IN RS-232C OUT L R
RGB A
REMOTE
WIRED
AUDIO
OPTION
AC IN
POWER
Remove the blank panel of the Plasma Display Monitor.
1) Place the Plasma Display Monitor upside down (with the screen faced downward) on the work table gently.
Note: Be careful not to get the screen glass scratched or damaged.
Rear side
SPEAKER OUT
SPEAKER OUT
R
( 9 (
L
9
1 2
4
AUDIO MAKE IN RS-232C
OUT L R
RGB A
REMOTE
WIRED
AUDIO
OPTION
SPEAKER OUT
SPEAKER OUT
R
( 9 (
L
9
2) Unscrew the 4 screws (1 to 4) indicated in the illustration (Fig. 1) to detach the blank panel of the Plasma Display Monitor.
Note: This removed blank panel is not used when printed board ass�y is installed. Retain all the screws for later use.
Blank panel
3
Fig. 1
Video Input Unit
3
Install the Video Input Unit.
1) There are two connectors on the inner surface of the Video Input Unit. By aligning these two connectors with the connectors inside the monitor, push the Video Input Unit so that the connectors are fully connected. 2) Fix the Video Input Unit with the 4 screws removed in step 2 (1 to 4) (Fig. 3).
Connector
Connector
Rear cover
Connector
Fig. 2
1 2
VIDEO AUDIO L/MONO R IN VIDEO AUDIO L/MONO Y/C IN R Y/G Pb/B VIDEO
4
4
Operate the Plasma Display Monitor.
After the Video Input Unit is installed, operate the monitor and check that image and sound are reproduced correctly through the following inputs: VIDEO A, VIDEO B, and COMPONENT/RGB terminals.
AUDIO L/MONO VD R
IN
OUT
Pr/R
HD/Cs
VIDEO A
VIDEO B
COMPONENT/RGB B
RGB A
AUDIO IN
REMOTE
RS-232C
MAKE WIRED
SPEAKER OUT
R
SPEAKER OUT
L
(
9
(
9
Fig. 3
3
2
|
|
|
> |
|
