JVC KD-G152EN
Owner's Manual

ENGLISH

Adjusting the sound
You can adjust the sound characteristics to your preference.

Indication
BAS*1 (bass) TRE*1 (treble) FAD*2 (fader)

To do:
Adjust the bass.

Range
�06 (min.) to +06 (max.) �06 (min.) to +06 (max.) R06 (Rear only) to F06 (Front only) L06 (Left only) to R06 (Right only) LOUD ON J LOUD OFF

1

Adjust the treble.

Adjust the front and rear speaker balance.

Ex.: When �TRE� is selected

BAL (balance)

2
LOUD*1 (loudness)
Indication pattern changes as you adjust the level.

Adjust the left and right speaker balance.

Boost low and high frequencies to produce a wellbalanced sound at low volume level.

VOL*3 (volume)

Adjust the volume. 00 (min.) to 30 or 50 (max.)*4

*1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including �USER.� *2 If you are using a two-speaker system, set the fader level to �00.� *3 Normally the +/� buttons work as the volume control. So you do not have to select �VOL� to adjust the volume level. *4 Depending on the amplifier gain control setting. (See page 18 for details.)

16