I was so pleased to get the owner`s manuel within one hour! Thanks again.
Text excerpt from page 27 (click to view)
Adjusting Parametric EQ
1 Follow steps ~ to ! on page 24.
â¢ In step Å¸, select âParametric.â
5 Select the frequency (adjustable
between 20 Hz â 20 kHz).
2 Select the bandâBand1/2/3.
â¢ Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.)
Ex.: When â1 kHzâ is selected for âBand2â
Band1: Low band (20 Hz to 1.2 kHz) Band2: Mid band (80 Hz to 5 kHz) Band3: High band (315 Hz to 20 kHz)
3 Adjust the enhanced level for the
selected band within the range of â10 to +10. 0.7/1/2/3/4/5.
6 Select the band width (Q)â
â¢ To adjust the other bands, press BACK. Then repeat steps 2 to 6.
7 Finish the procedure.
â¢ Once you have made adjustments, it is memorized. The memorized setting is recalled next time you select Parametric EQ.