I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Excelent service, the manual is complete, very cheap and fast
Alberto
Text excerpt from page 18 (click to view)
KD-SX927R
Removing the turn table / spindle motor (See Fig.37 and 38)
Prior to performing the following procedure, remove the top cover, the connector assembly and the chassis / clamper assembly. 1. Remove the two screws K attaching the spindle motor assembly through the slot of the turn table on top of the body. 2. Unsolder the wire on the connector board if necessary.