The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Text excerpt from page 22 (click to view)
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your preference.
2
Adjust the setting.
To increase the level or turn on the loudness To decrease the level or turn off the loudness Equalization pattern changes as you adjust the bass or treble.
1
Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:
BAS
(bass)
TRE
(treble)
FAD
(fader)
VOL
(volume)
LOUD
(loudness)
BAL
(balance)
Ex. 1: When you adjust �TRE� (treble)
Indication To do: BAS*1 Adjust the bass.
Range �06 (min.) | +06 (max.) Ex. 2: When you turn on the loudness
Adjust the left and right speaker balance. Boost low and high frequencies to produce a wellbalanced sound at low volume level.
To reset each sound mode to the factory settings, repeat the same procedure and reassign the preset values listed in the table on page 21.
LOUD*1
VOL*3
Adjust the volume. 00 (min.) | 50 (max.)
*1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including �USER.� *2 If you are using a two-speaker system, set the fader level to �00.� *3 Normally the control dial work as the volume control. So you do not have to select �VOL� to adjust the volume level.