There are currently no product reviews.
This is a high quality manual with clear schematic and components layout diagrams ; with service procedure included.
This service manual for the Kenwood KT-990D was reproduced really well ,is very legible and manual is complete.Combined with the low price paid,in the future,I will be checking Owner-Manuals.com any time I need a manual.
When I purchased this manual I had my doubts regarding the quality as the price was so reasonable as compared to other outlets.
The manual itself is of high standard the print is very clear as are the diagrams. Obviously with the diagrams one has to zoom in otherwise it is to small to be able to read.
Overall I am very pleased with the company who delivered as they said and with the manual they supplied.
I occasionally require a manual and now having registered with this company I shall order from them in the future.
I was at first dubious about payiong for downloaded manuals but having done so, I was extremely impressed with quality of the two manual I ordered, well worth the small price I paid.
I would highly recommend these to my friends.
reasonable price for the schematic - the service is perfect, all as expected and pointed by instructions - good scan of the original plans - thank you!
REFERENCE: Prior to performing the following procedures, turn the mode gear on the bottom of the body until the respective part comes to the EJECT position (Refer to Fig.1).
Removing the reinforce bracket (See Fig.1 and 2)
1. Remove the screw A attaching the reinforce bracket on the bottom of the body. 2. To release joint a, turn and detach the reinforce bracket from the side bracket assembly as shown in Fig.2
Mode gear Reinforce bracket
Removing the cassette guide (See Fig.3)
1. Turn the mode gear to set to RVS play or subsequent mode. 2. Remove the cassette guide from the main chassis while releasing each two joint tabs b in the direction of the arrow.
Removing the head board (See Fig.4)
1. Remove the screw B on the upper side. Unsolder the wires on the under side of the head board, if necessary. REFERENCE: When reassembling, twist the wires by turning the head board twice remarked c and pass through the notch d as shown in Fig.4.
Head board notch d