This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
It was easy done, and I got exactly what I was looking for.
Text excerpt from page 3 (click to view)
INSTALLATION �Install the MC-R433U in the CD/DVD Library.
Before starting installation, be sure to turn both the host computer and peripherals off. For information related to the CD/DVD Library, refer to the instruction manual for the CD/DVD Library.
Procedure for Opening the Drive Storage Cover of the CD/DVD Library
ENGLISH
Drive storage section Screw Screw
Procedure for Opening the Door of the CD/DVD Library
Drive storage cover
<With the MC-8100LU>
Drive locking screw mounting hole
Drive storage section
Drive storage cover
Drive storage section
Screw
<With the MC-8100LU>
* The illustration shows the CD/DVD Library with the drive storage cover removed for ease of description.
<With the MC-8200LU>
1.
Drive storage section
Remove the screws from the drive storage cover of the CD/DVD Library. Remove the drive storage cover.
2.
Procedure for Determining the Setup Position for MC-R434U
Drive locking screw mounting hole
Drive No. 6 Drive No. 5
Drive No. 4
<With the MC-8200LU>
Drive No. 4 Drive No. 3 Drive No. 2 Drive No. 1
Drive No. 3 Drive No. 2 Drive No. 1
1. 2. 3. 4.
Select the [DOOR OPEN MODE] on the MENU screen of the CD/DVD Library's LCD. Press and hold the "SELECT" switch for five seconds. Turn off the power of the CD/DVD Library when [THE DOOR CAN BE OPENED] message is displayed on the LCD. Insert the key in the key cylinder located at the center of the door to unlock and open the door.
Install the drives to the drive slots No.1 through No.6 (No. 1 through No. 4 in the case of the MC-8100LU) sequentially. It makes the work easy if the drives are installed from the lowest number to the highest.
